10 Frame Piston Pump

This pump is made with brass manifolds, 304 stainless steel valve assemblies, chrome-plated 304 stainless steel cylinders and sleeves. It comes standard with NBR (Buna-N) seals and o-rings. Its low RPM is designed for belt drive use. The triplex uniflow design provides continuous liquid for smooth operation.

CAT Pumps is an industry-leading manufacturer of reliable and dependable pumps. Click here to shop our full selection of CAT Pumps. 

Pump Dimensions:  17.28" x 11.42" x 6.3"

Pump Features:

• Three piston rods
• Wetted cups and floating pistons are lubricated and cooled by pumped liquid
• Mechanically actuated inlet valves for strong lift and easy prime
• Oil bath crankcase for optimum lubrication
• 100% wetted seal design allows pumped liquid to cool and lubricate for a long service life

Pump Specifications:

• Maximum Flow: 6 GPM
• Pressure Range: 100-1200 PSI
• RPM: 850
• Bore: 0.787"
• Stroke: 1.122"
• Crankcase Capacity: 40 oz.
• Inlet Pressure Range: -8.5 to 40 PSI
• Inlet Port (1): 1" NPTF
• Discharge Ports (3): 3/4" NPTF
• Shaft Diameter: 0.984"
• Please note that this pump does NOT come with oil - find authentic CAT Pumps Oil here.

Compatible Pump Parts:

• 6107 crankcase oil
• 7012 pressure regulator
• 7500S pressure sensitive regulating unloader
• 33962 pop-off valve
• 6088 pressure gauge
• 6029 pulsation dampener
• 711500 captive acceleration tube
• 7105.5 inlet filter
• 990840 flexible inlet hose
• 990832 flexible discharge hose
• 34334 oil drain kit

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).